Description
Knipex Cobra High Performance Water Pump Pliers, Fast Adjust & Self Lock - 300mm High-tech water pump pliers 30-fold fine adjustment at the touch of a button for fast adjustment to different sizes of component Has self-locking grip on pipes and nuts Particularly large grip width (up to a wrench opening of 60 mm / pipes up to 2 3⁄4 inches) with low weight (531 g) For turning, pulling, gripping, holding and screwing Gripping teeth induction hardened to approx. 61 HRC for secure hold and long service life Grips pipes, nuts and flat, round and angular components High level of user comfort due to constant hand-friendly gripping position resulting from fine adjustment Sits firmly in the hand thanks to non-slip handles Chrome vanadium electric steel, forged, oil hardened High-tech water pump pliersQuality for craftsmen – comfort for all users The Knipex 87 01 300 Cobra with a length of 300 mm is one of the bigger models of water pump pliers from the Knipex Cobra range. With good torque and a grip width of up to 70 mm, they are particularly good for professional users for whom the capacity of the classic 250 mm long Cobra is not sufficient. The benefits of working with these water pump pliers are plain to see: they can be positioned on the component quickly and are self-locking, e.g. on pipes and nuts. With its plastic-coated handles, the Knipex Cobra 87 01 300 sits firmly in the hand. It is ideal for use on pipes up to a diameter of 2 3⁄4 inches or 70 mm and for nuts with a wrench opening of up to 60 mm. With self-locking effect and fine adjustment For pipes, nuts, sleeves, for various kinds of components: the professional user applies the Knipex Cobra quickly and accurately with just one hand movement. The spring-loaded hinge bolt locks securely into place without adjusting inadvertently. Thanks to the 30-fold fine adjustment, the Knipex Cobra 87 01 300 can be ideally adjusted to different sizes of the component. This fine adjustment also ensures that the user is able to find a hand-friendly gripping position for every grip width. Clamps onto the component securely The Knipex Cobra clamps onto the component securely by itself thanks to the jaw geometry developed by Knipex. This means the user can put all energy into the desired movement without pressing the pliers handle together – and thus without energy loss: round components can be turned, bolted connections tightened and released. Tough and strong We forge the Knipex Cobra from chrome vanadium steel, and use a multiple stage hardening process to give it the ideal balance between hardness and toughness. This makes it extremely durable. To achieve a lasting secure 'bite' on the work component, we use high-frequency current to bring the gripping teeth to a hardness of approx. 61 HRC. The Knipex Cobra is further stabilised by the box joint design. Unlike pliers with mounted joints, no tilting forces arise when under strain. The handles stabilise each other in the joint. Knipex quality: several manufacturing and hardening and tempering steps Professional users expect a tool quality that will last for many hard years of work. We develop and manufacture our pliers for the most demanding users imaginable: for craftsmen. Every pair of pliers from Knipex is manufactured to the highest standards using the best materials. A purchase for many years of use during assembly work, on the building site, in production and in the workshop. MPN: 8701300EAN: 4003773034087
