|When the system is showing the time/room temperature display,
press the scanning button and the last temperature measurement will be
displayed. After two "beeps" the system enters into the
1. Remove the probe cap; the thermometer is now in the ear measurement mode.
When measuring the ear temperature, put the probe into the ear first,
then press the scanning button. One second later you will hear a
"beep" and you can take out the thermometer, the measurement is now
1. Making sure the probe cap is on, press the scan button to measure the forehead temperature.
2. When measuring the forehead temperature, hold in the scanning button, put the end of the probe cap vertically on one temple with gentle pressure, and move it to the other temple across the forehead. Release the scanning button and the measurement will be shown.
When the measured temperature exceeds 38.0ºC, the thermometer will send out one long "beep" and two short ones; the display will then show the fever icon.