2 x Super Protector for Wall/Floor Grout

Problem/situation Cement residue Stubborn cement grout film and mortar residue Real problem dirt on floor tiles, flagstones and all types of natural stone Oil, grease and moisture Dirt and grease Target All types of porous and non-porous ceramic tiles and flagstones Porous and non-porous ceramic tiles and flagstones etc. Floor tiles, flagstones and all types of natural stone Wall and floor grout For all types of highly-porous to slightly-porous tiles and flagstones Format Concentrated liquid Concentrated liquid Concentrated liquid Liquid Concentrated liquid Usage First clean with clean water. Then apply the solution liberally. Scrub the surface. Leave to work for 15-20 minutes, Then scrub the treated surface. Remove the solution and mop again with clean water Dissolve half a litre of the remover in a bucket with 5 litres of water. For more stubborn cement and mortar, a stronger solution can be made with 1 litre of cement remover and 4 litres of water Dissolve 0.5L in half a bucket water. Apply to the surface with a cloth/mop. Scrub with a scrubbing brush. Leave it for minutes and scrub again. Use a mop to remove the liquid. Mop with clean water Clean and rinse the grout with water and leave to dry for 24h. For floor grout use the pipette to apply, for wall grout a brush. After 36-48 hours the surface can be cleaned again in the usual way Apply undiluted evenly and in one direction with a paint roller. If 10 minutes after applying some product is left unabsorbed on the tiles it must be removed immediately with a dry lint-free cloth Available sizes 1L & 5L 1L & 5L 1L 250ml 1L & 5L