Description
Problem/situation
Cement residue
Stubborn cement grout film and mortar residue
Real problem dirt on floor tiles, flagstones and all types of natural stone
Oil, grease and moisture
Dirt and grease
Target
All types of porous and non-porous ceramic tiles and flagstones
Porous and non-porous ceramic tiles and flagstones etc.
Floor tiles, flagstones and all types of natural stone
Wall and floor grout
For all types of highly-porous to slightly-porous tiles and flagstones
Format
Concentrated liquid
Concentrated liquid
Concentrated liquid
Liquid
Concentrated liquid
Usage
First clean with clean water. Then apply the solution liberally. Scrub the surface. Leave to work for 15-20 minutes, Then scrub the treated surface. Remove the solution and mop again with clean water
Dissolve half a litre of the remover in a bucket with 5 litres of water. For more stubborn cement and mortar, a stronger solution can be made with 1 litre of cement remover and 4 litres of water
Dissolve 0.5L in half a bucket water. Apply to the surface with a cloth/mop. Scrub with a scrubbing brush. Leave it for minutes and scrub again. Use a mop to remove the liquid. Mop with clean water
Clean and rinse the grout with water and leave to dry for 24h. For floor grout use the pipette to apply, for wall grout a brush. After 36-48 hours the surface can be cleaned again in the usual way
Apply undiluted evenly and in one direction with a paint roller. If 10 minutes after applying some product is left unabsorbed on the tiles it must be removed immediately with a dry lint-free cloth
Available sizes
1L & 5L
1L & 5L
1L
250ml
1L & 5L